Go
News Detail

【142】Cross Fire

文章附图

Product name: Cross Fire

Brief introduction

Players should keep the metal ring crossing track without touching the track. One 12V EM lock will release with audio if the ring reach the end of the track.

Details introduction

1. When players remove the iron ring from the starting position, system will play sound to start the game.

2. Players should slide the iron ring to cross the slideway without touching the slideway. If they touch the slideway accidentally, system will play sounds to remind that the game fails. Players need to return the iron ring to the starting position and play again.

3. If the iron ring glides from the starting position to the end position without touching the slideway, one 12V EM lock will release with audio.

About usage

How to reset?

After triggering successfully, please return the iron ring to the starting position to reset.

How to install it?

wps1.jpg

There are 4 wires from controller:

wire 1: connect the iron ring;

wire 2: connect the starting position;

wire 3: connect the slideway;

wire 4: connect the end position.

Note: Iron ring, slideway, starting position (iron sheet) and end position (iron sheet) need to prepare by yourself. The surface must be conductive.

Product highlights

1.Users can set up metal maze according to your puzzle.

2.Users can revise the audio by TF card in the controller.

Prop list

One controller with 4 wires

One 12V power supply.

How to connect to 12V EM lock?

The red wire of the controller should be connected to the red wire of the magnet lock. The black wire of the controller should be connected to the black wire of the magnet lock.

wps2.jpg

How to change audio files?

Owners can change audio files via SD card in the controller.

Attention: please make a copy of the original sound files in your computer in case of wrong operation.

1.Sound file must be MP3 format. Just changing the suffix of the file directly is invalid.

2.The path cannot be changed, if you revise sound files from 01 folder, then you put it back to 01 folder rather than other folder.

3.File names cannot be changed, keep the file name same as original.

More details, please check the video via this link:

https://www.youtube.com/watch?v=bgWvqwqJGGo

Audio configuration

wps3.png