【145】 E-mail system

Product name: E-mail system

Introduction

Players need to figure out the password through some puzzles. When they input the correct entrance password via the computer keyboard, system will log on to a mailbox, in which players can find some hidden clues or figure out the whole story from the mails(1 to 10 mails) for the next step. Meanwhile, system will release a 12V EM lock or light up a 12V bulb.

Version introduction:

No relay(standard) version: There is no relay. The prop can not unlock or turn on light.

Relay version: There is a relay on the controller. The prop can unlock or turn on light.

About usage

How to reset ?

There are three options to reset, which can be adjusted by room owner in the setting interface.

Auto-reset mode: After being triggered successfully, the prop will reset automatically in N seconds.

Power-off-reset mode: Power off and restart to reset after triggering successfully.

Manual-reset mode: After triggering successfully, click the hidden button on the top left of the screen with your mouse.

How to adjust three reset options?

Owner should choose the reset option on the setting page. Enter Administrator password “jxkj19871234” on the login interface. Then the system will enter setting page.

Auto-reset mode: choose the Reset Mode as “Automatic Mode”, then make Time N seconds (N is more than 0). When players enter the correct password, the system begins to count down and reset after N seconds.

Power-off-reset mode: choose the Reset Mode as “Automatic Mode”, then make Time 0 second.

Manual-reset mode: choose the Reset Mode as “Manual Mode”.

Then click “save”, and the system will return Login Interface.

How to set the password?

Owner should set the password on the setting page.

1. Enter Administrator password “jxkj19871234” on the login interface. Then the system will enter setting page.

2. Input the password you want. The password can be 1-30 digits of letters or/ and numbers. And letters are case-sensitive.

3. Then click “save”, and the system will return Login Interface.

How to revise the mails?

1. Please power off the prop, and take out the TF card in the controller. You will find the folder “1987”, in which there are two folders: “Email” and “System”.

2. Put picture (jpg or png format) mails in the folder “Email”

For example:

3. Replace the TF card and power on the prop, enter Administrator password “jxkj19871234” on the login interface. Then the system will enter setting page.

4. Owner can set 1-5 mails. Choose “Valid” then click “Select”, then choose a picture (jpg or png format) as email. For example, owner would like to set two mails, just choose the first two as “Valid”.

5. Then click “save”, and the system will return Login Interface.

How to revise the background of Login interface and Success interface?

1. Please power off the prop, and take out the TF card in the controller. You will find the folder “1987”, in which there are two folders: “Email” and “System”.

2. Put background picture (jpg or png format) in the folder “System”.

3. Replace the TF card and power on the prop, enter Administrator password “jxkj19871234” on the login interface. Then the system will enter setting page.

4. Click the “Select”, then choose a picture (jpg or png format) as background of login interface or login interface.

5. Then click “save”, and the system will return Login Interface.

Warm tips:

1. DO NOT delete all the original files.

2. The memory of TF card is 16G.

3. Please remove the buttons Ctrl, Shift, Alt, Delete, Windows and Fn on your keyboard, in order to prevent accidental software exits of the system.

How to revise the time to release a lock or light up a bulb?

Owner should set the time to unlock on the setting page.

Enter Administrator password “jxkj19871234” on the login interface. Then the system will enter setting page. Input the time you want. Then click “save”, and the system will return Login Interface.

For example: you want to release a lock in 30 seconds after triggering this prop, just input “30”.

How to connect the lines ?

How to connect to 12V EM lock?

Product highlights

1. Support to revise the entrance password (1-30 digits of letters or/ and numbers).

2. Support to change the mail content.

3. Support to adjust three reset options: Auto-reset mode, Power-off-reset mode, Manual-reset mode.

4. Support to change the Login interface and Success interface background.

5. Support to connect with a 12V EM lock or a 12V bulb, please feel free to contact us before placing an order.

6. Support to revise the time to release a lock after being triggered.

Prop list

One controller with TF card and one relay (only for relay version, to connect with a lock)

One pcs of VGA interface

One 5v power supply