Go
News Detail

【160】Timer machine---Lattice Screen Series

文章附图

Product name: Timer machine---Lattice Screen Series

Version introduction

Standard version: There are just 2 metal buttons, without remote control.

Remote control version: There is a remote control with the prop. The remote control has 4 buttons. The two buttons on the left corner are start/ pause buttons. The two buttons on the right corner are reset buttons.

Brief introduction

Timer machine is generally used in escape rooms game. It includes one display screen and 2 buttons.(start/pause button and reset button). The screen is off before the button is pressed. Escape rooms can use it to record the game time.

About usage

How to play?

Start button/pause button: The time will start when this button is pressed once, the time will start counting. If you press again, the time will stop.

Reset button: The prop will reset if the reset button is pressed.

How to reset?

Press the reset button to reset.

How to match the remote control? (for remote control version)

1. Power off the controller.

2. Keep holding the set button on the controller and get 12v power supply to the controller. Please let go of your hand when you hear prompt tone.

3. Then system will enter into matching remote control mode.

4. Press any one button on the controller. Please let go of your hand when you hear prompt tone, which means the match is finished.

Product highlights

1. Users can revise the game audio via SD card in the controller.

2. Users can choose the version of their own.

3. The time can be set from 1 second to 24 hours.

Prop list

One controller with 2 metal buttons

One 12v power supply

One lattice screen

Two remote controls (one piece as gift to make up)

How to connect to 12V EM lock?

The red wire of the controller should be connected to the red wire of the magnet lock. The black wire of the controller should be connected to the black wire of the magnet lock.

wps1.jpg

How to change audio files?

Owners can change audio files via SD card in the controller.

Attention: please make a copy of the original sound files in your computer in case of wrong operation.

1. Sound file must be MP3 format. Just changing the suffix of the file directly is invalid.

2.The path cannot be changed, if you revise sound files from 01 folder, then you put it back to 01 folder rather than other folder.

3.File names cannot be changed, keep the file name same as original.

More details, please check the video via this link:

https://www.youtube.com/watch?v=bgWvqwqJGGo

Audio configuration

wps2.jpg