Go
News Detail

【161】 Countdown Timer-Lattice Screen Series

文章附图

Product name: Countdown Timer-Lattice Screen Series

Brief introduction

Countdown timer is generally used in escape rooms. There are 4 buttons. The screen is off before the button is pressed.

Start button: when it is pressed, the time will count down.

Pause/continue: time will pause if the button is pressed once. Time will go on counting down if the button is pressed again.

Success button: the countdown will stop and the 12V EM lock will release if the button is pressed.

Reset button: The prop will reset if the reset button is pressed.

When the count down is over, the prop will play failure sound.

The time can be set from 1 minute to 99 hours.

Version introduction:

Standard version: There are just 4 buttons, without remote control.

Remote control version: This prop contains a remote control. There are 4 buttons on the remote control. The button on the top left corner is start button. The button on the top right corner is pause/continue button. The button on the lower left corner is success button. The button on the lower right corner is reset button.

About usage

How to reset?

Press the reset button to reset.

How to set the count down time?

1. Power off the controller.

2. Keep holding the set button on the controller and get 12v power supply to the controller. Please let go of your hand when you hear prompt tone.

3. Press the set button once, then wait for 3 seconds. System will enter into setting time mode.

4. Set the count down time to what you want with the 4 game buttons. Please wait for 10 seconds after configuration, system will save the time automatically.

Warm tip: the time can be set from 1 minute to 99 hours. The remote control can also be used to set time on step 4.

How to match the remote control? (just for remote control version)

1. Power off the controller.

2. Keep holding the set button on the controller and get 12v power supply to the controller. Please let go of your hand when you hear prompt tone.

3. Press the set button twice. Then system will enter into matching remote control mode.

4. Press any button on the remote control. Please let go of your hand when you hear prompt tone, which means the match is finished.

Product highlights

1. Room owner can revise the game audio via micro SD card in the controller.

2. Room owner can set the countdown time.

Prop list

One controller with 4 metal buttons

One 12V power supply

One lattice screen

Two remote controls   ( one for back up)

Warm tip: room owner needs to prepare one 12V 23A battery for the remote control.

How to connect 12V EM lock?

The red wire of the controller should be connected to the red wire of the magnet lock. The black wire of the controller should be connected to the black wire of the magnet lock.

wps1.jpg

How to change audio files?

Owners can change audio files via SD card in the controller.

Attention: please make a copy of the original sound files in your computer in case of wrong operation.

1.Sound file must be MP3 format. Just changing the suffix of the file directly is invalid.

2.The path cannot be changed, if you revise sound files from 01 folder, then you put it back to 01 folder rather than other folder.

3.File names cannot be changed, keep the file name same as original.

More details, please check the video via this link:

https://www.youtube.com/watch?v=bgWvqwqJGGo

Audio configuration

wps2.jpg