Go
News Detail

【169】Talking metal buttons

文章附图

Product Name: Talking metal buttons

Brief introduction

This prop includes some metal buttons. Players need to figure out the correct sequence to press these buttons. When the order is correct, the system will play a correct sound tip. When the order is wrong, the system will play a wrong sound tip. Players should find the right sequence through continuous attempts to open the door.

About usage

How to reset?

There are three reset ways. Users can revise it via SD card in the controller.

1. After triggering successfully, wait 30 seconds to reset.

2. After triggering successfully, input the right password to reset.

3. After triggering successfully, re-power the controller to reset.

How to set the password?

1. Power off the controller.

2. Keep holding on the set button and power on the controller.

3. Let go your hand when hear a voice tip and press the buttons in a sequence you want.

4. Wait for 10 seconds, the system will save the password automatically.

Product highlights

1. Users can set the password of their own.

2. Users can revise the game audio of their own.

3. Users can choose the quantity of buttons. (1-16 buttons)

4. Users can adjust the reset methods of their own.

Prop list

One controller

One 12v power supply

Several metal buttons

How to change the sound files?
Users can change the sound files via SD card in the controller.
Attention: please make a copy of the original sound files in your computer in case of wrong operation.

1. Sound file must be MP3 format. Just changing the suffix of the file directly is invalid.

2. The path cannot be changed, if you revise sound files from 01 folder, then you put it back to 01 folder rather than other folder.

3. File names cannot be changed, keep the file name same as original.

More details, please check the video via this link:
https://www.youtube.com/watch?v=bgWvqwqJGGo

wps1.jpg

How to connect with 12V electromagnetic lock?

The red wire of the controller should be connected to the red wire of the magnet lock.

The black wire of the controller should be connected to the black wire of the magnet lock.

wps2.png