Go
News Detail

【184】Multi-function console---computer simulator series

文章附图

Product name: Multi-function console---computer simulator series

Brief introduction

This prop is a simulation of computer and it has many functions which like a smart console of aircraft or wheel and so on. It is very suitable for science and technology scenario. Players need to figure out 5 puzzles successfully, then they will get 5 game clues separately for next step (photo or video clues). Meanwhile, the system will release a 12V EM lock or light up a 12V light.

About usage

How to play?

Players will find a computer when they enter the chamber room. 5 puzzles appear on the computer monitor. Please check the picture as below.


wps1.jpg

Players need to figure out these 5 puzzles according some clues.

Step1: Knobs puzzle: Players need to adjust 4 knobs to right direction, then the gray light will turn into green color and the system will show a picture or video clues for them.

1. Step 2: Number keyboard puzzle: Players need to put the right password via the number pad, then the gray light will turn green color and the system will show a picture or video clues for them.It supports 1-30 numbers

Step 3: Energy bar puzzle: Players need to adjust 6 energy bars to right position, then the gray light will turn into green color and the system will show a picture or video clues for them. (3 gears can be adjusted)

Step 4: Sliders puzzle: Players need to adjust 6 sliders to right position, then the gray light will turn into green color and the system will show a picture or video clues for them. (6 gears can be adjusted)

Step 5: Colorful buttons puzzle: Players need to adjust 6 buttons to right color,

the gray light will turn into green color and the system will show a picture or video clues for them. (5 colors: red, yellow, green, blue and white)

2. The system will release a 12V EM lock or light up a 12V light when 5 puzzles are solved successfully.

How to reset ?

There are 2 options to reset, which can be adjusted by room owner in the setting interface.

Manual-reset mode: After triggering successfully, adjust all puzzles to wrong password, then the prop will reset automatically.

Auto-reset mode: After being triggered successfully, the prop will reset automatically in N seconds.

Prop list

One controller with TF card and one 12v relay (only for relay version, to connect with a lock)

One VGA interface

One 5v power supply

Warm tip:

Room owners should provide the display screen, USB mouse, keyboard and 12 V EM lock of their own.

Product Highlights

1. These 5 puzzles password can be set by room owner.

2. These 5 clues can be adjust by room owner.(picture or video is okay)

3. The reset method can be revised by room owner.

4. Support to connect with a 12V EM lock or a 12V bulb.

5. Support to change the time to release a lock after being triggered.

How to revise the clues?

1. Power off the prop. Take out the TF card from controller. Connect the TF   card to a computer. You will find one folder.(folders name is 1987) You need to put the picture or video into this folder.

Note: The picture must be JPG format. The video can be MP4 or AVI format.

wps2.jpg

2. Then inset the TF card back to controller and power on the controller.

3. You can set the 5 clues (picture or clues) before the progress bar finished.

Please check these 2 pictures as below. Don’t forget to click save to finish the setting.

wps3.jpgwps4.jpg

How to set the password?

Power on the prop. You need to click the hidden button on the top left of the screen with your mouse before the end of progress bar.

Then you can set the password of your own. Don’t forget to click save to finish the setting.

How to adjust the reset method?

There are two modes can be chosen: Manual mode and Automatic mode.

Power on the prop. You need to click the hidden button on the top left of the screen with your mouse before progress bar finished.

wps5.jpg

About relay setting, If you enter 5, it means that the relay will be triggered in 5 seconds. (The 12V EM lock will release in 5 seconds after players enter the right passwords).

Note: The default is 0 second.

Don’t forget to click save to finish the setting.

How to connect to 12V EM lock?

wps6.jpg